Skip to content

Phone mounts

JOYROOM Motorcycle mount

A phone mount using a two-chamber pneumatic damping system stated to absorb up to 95% of vibration, taking 4.7 to 7 inch phones with cases up to 18 mm thick.

JOYROOM motorcycle phone mount with pneumatic damper

JOYROOM Motorcycle mount

A phone mount using a two-chamber pneumatic damping system stated to absorb up to 95% of vibration, taking 4.7 to 7 inch phones with cases up to 18 mm thick.

Damping
Pneumatic two-chamber system, stated to absorb up to 95% — described by the maker as different from passive spring dampers (maker’s bullet)
Device size
4.7 to 7 inch, including thicker cases up to 18 mm (maker’s bullet)
Construction
Tie rods and ball heads in glass-fibre-reinforced nylon (maker’s bullet)
Locking
One-second quick lock — press the phone onto the centre button; release with the side clamps (maker’s bullet)
Protection
Non-slip silicone pads on the mounting surface and the clamp arms (maker’s bullet)
Handlebar diameter
The maker puts nothing in writing on this.
Amazon reference
B0G7T6D8KS (one reference across 1 Amazon marketplace)
  • The only mount here publishing a damping figure, and it names the mechanism
  • Takes cases up to 18 mm, which is 3 mm more than the other damped mount here
  • The 95% figure carries no stated frequency or test condition

Best for: A single-cylinder or twin with real vibration, carrying a phone with a thick case.

≈ €30
Check price on Amazon

Specifications

Damping
Pneumatic two-chamber system, stated to absorb up to 95% — described by the maker as different from passive spring dampers (maker’s bullet)
Device size
4.7 to 7 inch, including thicker cases up to 18 mm (maker’s bullet)
Construction
Tie rods and ball heads in glass-fibre-reinforced nylon (maker’s bullet)
Locking
One-second quick lock — press the phone onto the centre button; release with the side clamps (maker’s bullet)
Protection
Non-slip silicone pads on the mounting surface and the clamp arms (maker’s bullet)
Handlebar diameter
The maker puts nothing in writing on this.
Amazon reference
B0G7T6D8KS (one reference across 1 Amazon marketplace)

What the seller commits to paper

A pneumatic two-chamber damping system, stated to absorb up to 95% and described by the maker as different in kind from passive spring dampers. 4.7 to 7 inch phones including cases up to 18 mm. Glass-fibre-reinforced nylon tie rods and ball heads. One-second quick lock — press the phone onto the centre button, release with the side clamps. Non-slip silicone pads on the surface and the clamp arms. 360° ball joint.

The problem this product exists to solve

Handlebar vibration destroys phone camera modules. Modern phones have moving optical stabilisation, and a motorcycle handlebar at 4,000 rpm is a shaker table.

Three of the five mounts in this family do not mention it at all. This one is built around it.

The mechanism, named

A two-chamber pneumatic damper against a passive spring. That is a description of how, not just that — which makes it a design statement rather than a claim.

The figure, read properly

Up to 95%.

No frequency, no amplitude, no test rig named. Vibration damping is frequency-dependent by nature: a system that handles 100 Hz well may do nothing at 30 Hz. “Up to 95%” without a band is the maker’s claim, and it is set beside a mechanism description that is genuinely specific.

18 mm of case

Three millimetres more than the other damped mount here. That sounds trivial and it is the difference between a rugged case fitting and not — measure yours before choosing.

The locking, the right way round

One second to lock, with the phone itself. Two side clamps to release.

Easy in, deliberate out. A mount that releases as easily as it locks is a mount that gives your phone to the road.

Availability

Around 30 € on the German Amazon store, in the single reading behind this page.

What Keepa returned in the single reading behind this page. Availability and prices move without notice.

Prices quoted in this text were read on 18 September 2026. The live price is at the top of the page.

More phone mounts

  • Lamicall BP07 handlebar phone holder

    Lamicall BP07

    A handlebar phone holder for 4.7 to 6.8 inch devices with a quick-release clamp, one-handed operation and thick silicone at the four corners.

    Device size
    4.7 to 6.8 inch phones and GPS devices (maker’s bullet)
    Mounting
    Quick-release clamp, no tools — press a button to open (maker’s bullet)
    Operation
    Auto-retracting arms; press down with the phone to lock (maker’s bullet)
    Protection
    Thick silicone resin on the four corners and the contact surface (maker’s bullet)
    Vibration damping
    NOT published — two mounts in this family publish a damping system.
    Identical listing text
    Three of this listing’s bullets appear word for word in the Grefay listing in this same family, under a different brand and a different reference.
    Amazon reference
    B09MT4N4HW (one reference across 6 Amazon marketplaces)
    EAN
    8435611497888
    • Tool-free quick-release clamp, so it moves between machines
    • Published on all six marketplaces at a consistent price
    • No vibration damping published — the thing that damages a phone camera on a motorcycle

    Best for: A scooter or a low-vibration machine, or a bicycle, where damping is not the issue.

    ≈ $19 / £17 / €18
    Check price on Amazon
  • MOGGAM PH00 anti-vibration motorcycle phone mount

    MOGGAM PH00

    An anti-vibration phone mount with three fitting methods and a double silicone damping system, whose maker publishes which scooters it cannot be fitted to.

    Fitting methods
    Three — round bar 22 to 32 mm (4 rubber rings included), mirror thread M8 and M10, or mirror stem 12 to 14 mm with the 12 mm ring (maker’s bullet)
    Maker’s exclusion
    Scooters such as the TMAX and Forza have none of the three fitting points — the maker says so explicitly (maker’s bullet)
    Damping
    Double damping system in silicone, stated to absorb engine and road shock and protect the phone camera (maker’s bullet)
    Phone size
    5.4 to 7.2 inch, up to 15 mm thick with a case; the maker names its own thicker model for over 15 mm (maker’s bullet)
    Materials
    CNC aluminium ring and base, stainless steel telescopic arms, high-strength plastic platform with aluminium reinforcement (maker’s bullet)
    Operation
    One-handed in one second, 360° rotation (maker’s bullet)
    Amazon reference
    B0D2LVTZQC (one reference across 6 Amazon marketplaces)
    EAN
    0753389451030
    • Names the machines it will NOT fit, by model — the most useful bullet in this family
    • Three fitting methods with exact dimensions for each
    • The three fitting points have to be checked on your machine before ordering

    Best for: A machine with a free handlebar, a mirror thread or a mirror stem — checked before ordering.

    ≈ $28 / £35 / €28
    Check price on Amazon
  • SP Connect Moto Mount Pro handlebar mount in black

    SP CONNECT Moto Mount Pro

    A CNC aircraft-aluminium handlebar phone mount fitting four bar diameters from 22.2 to 31.7 mm, adjustable through 360 degrees in six-degree steps in portrait or landscape.

    Bar diameters
    22.2 / 25.4 / 28.6 / 31.7 mm — 0.875 / 1.0 / 1.125 / 1.25 inch (maker’s bullet)
    Material
    CNC-machined aircraft aluminium (maker’s bullet)
    Adjustment
    360°, in 6° steps; portrait or landscape (maker’s bullet)
    Supplied
    Moto Mount Pro, plastic spacing inserts, SPC+ Head and a Direct Adapter (maker’s bullet)
    System requirement
    This is a mount for a system — the phone needs the matching case or adapter, which is what the SPC+ Head and Direct Adapter are for.
    Damping
    The maker puts nothing in writing on this.
    Amazon reference
    B0721D5WNL (one reference across 6 Amazon marketplaces)
    EAN
    4028017531382
    • Four bar diameters published in both millimetres and inches, with spacing inserts supplied
    • Six-degree detents, so the angle set is the angle it keeps
    • A system mount — the phone needs the matching case or adapter, which is a further purchase for most phones

    Best for: A rider already in this maker’s case system, wanting a mount machined rather than moulded.

    ≈ $58 / £43 / €45
    Check price on Amazon

The rest of this rider’s shelf

  • Pinlock original replacement pins for helmet visors

    Pinlock 000388

    Original Pinlock replacement pins for visors with 5 mm holes, supplied as four sets of three parts — the spare part from the maker of the system itself.

    Fits
    Visors with 5 mm holes, for standard Pinlock inserts (from the title)
    Origin
    Original spare part from Pinlock (maker’s bullet)
    Quantity
    3 parts, 4 sets (from the title)
    Insert included
    No — these are the pins only.
    Material
    The maker puts nothing in writing on this.
    Listing bullets
    One, of fifteen words.
    Amazon reference
    B07NJ1F8QG (one reference across 6 Amazon marketplaces)
    EAN
    0731628294358
    • The original part from the company that invented the system, which removes the fit question entirely
    • Four sets, so a helmet and its spares are covered for years
    • A single bullet of fifteen words is the whole listing

    Best for: A rider who wants the original pins rather than a compatible copy.

    ≈ £8 / €15
    Check price on Amazon
  • SZMYLED anti-fog film for a motorcycle helmet visor

    SZMYLED Anti-fog film

    A universal anti-fog film stated to suit full-face, half and open-face helmets, made of an abrasion-resistant material — with no dimensions published anywhere in the listing.

    Dimensions
    NOT published by the maker — and on a part cut to an aperture, this is the deciding figure.
    Stated fitment
    Most helmets — full-face, half and open-face (maker’s bullet)
    Material
    A special material with the anti-fog function built in during production (maker’s bullet)
    Properties
    Rain-resistant and abrasion-resistant (maker’s bullet)
    Fitting
    Stated to be inserted into any helmet visor (maker’s bullet)
    Durability figure
    The maker puts nothing in writing on this.
    Amazon reference
    B08KSV45XD (one reference across 5 Amazon marketplaces)
    EAN
    6955154563076
    • The least expensive anti-fog product in this family on its home market
    • The anti-fog property is stated to be in the material rather than a coating on it
    • NO dimensions published, which is the only figure that decides whether it fits

    Best for: A buyer prepared to measure on arrival and return it if the size is wrong.

    ≈ €7
    Check price on Amazon
  • XII WY ultra-thin anti-fog film for a helmet visor

    XII WANG YE KG004-UT-C

    An ultra-thin adhesive anti-fog film of 24.5 × 9.5 cm in TAC material, stated water-repellent and scratch-resistant, with the maker recommending you measure your visor first.

    Dimensions
    24.5 cm × 9.5 cm (maker’s bullet) — the title states 9.5 cm × 25 cm
    Material
    High-tech TAC long-term anti-fog film (maker’s bullet)
    Fixing
    Adhesive tape on the back (maker’s bullet)
    Properties
    Water-repellent, scratch-resistant, flexible, stated without optical distortion (maker’s bullet)
    Maker’s instruction
    Measure your visor before ordering (maker’s bullet)
    Pin fitting
    Not applicable — this film sticks rather than clipping to pins.
    Amazon reference
    B09SFBZRNX (one reference across 6 Amazon marketplaces)
    EAN
    0717340862686
    • Dimensions published, and the maker tells you to check yours against them
    • Works on a visor with no pins at all, which a Pinlock insert cannot
    • The title says 9.5 × 25 cm and the bullet says 24.5 × 9.5 cm — half a centimetre apart

    Best for: A visor with no Pinlock pins, where an insert is not an option.

    ≈ $17 / €19
    Check price on Amazon

All phone mounts