Skip to content

Straps and nets

Rhino USA HDKIT-4PK

A four-pack of 4 cm by 2.4 m ratchet straps rated at 2,000 kg with electro-galvanised ratchets, coated S-hooks and a lifetime replacement warranty.

Rhino USA four-pack of ratchet tie-down straps

Rhino USA HDKIT-4PK

A four-pack of 4 cm by 2.4 m ratchet straps rated at 2,000 kg with electro-galvanised ratchets, coated S-hooks and a lifetime replacement warranty.

Rating
2,000 kg (from the title). The listing does not state whether this is a break load or a working load limit.
Dimensions
4 cm × 2.4 m, four straps (from the title)
Release
EZ-Release system with a patented end cap, stated to protect the ratchet mechanism (maker’s bullet)
Construction
Electro-galvanised ratchet, ergonomic padded handle, coated S-hooks (maker’s bullet)
Warranty
Lifetime replacement warranty (maker’s bullet)
Standard cited
None — the LoadCare set in this family cites DIN EN 12195-2.
Amazon reference
DE B07JHGKFXQ · US B0CHMCN44T · GB B07JHGKFXQ · FR B07JHGKFXQ · IT B07JHGKFXQ · ES B07JHGKFXQ
EAN
0711841545291
  • A lifetime replacement warranty, which is the longest commitment in this family
  • A padded handle, which matters when four straps are tensioned in the cold
  • Publishes one load figure without saying whether it is break load or working load — and they differ by about three times

Best for: Frequent transport, where the warranty is the argument.

≈ £48 / €56
Check price on Amazon

Specifications

Rating
2,000 kg (from the title). The listing does not state whether this is a break load or a working load limit.
Dimensions
4 cm × 2.4 m, four straps (from the title)
Release
EZ-Release system with a patented end cap, stated to protect the ratchet mechanism (maker’s bullet)
Construction
Electro-galvanised ratchet, ergonomic padded handle, coated S-hooks (maker’s bullet)
Warranty
Lifetime replacement warranty (maker’s bullet)
Standard cited
None — the LoadCare set in this family cites DIN EN 12195-2.
Amazon reference
DE B07JHGKFXQ · US B0CHMCN44T · GB B07JHGKFXQ · FR B07JHGKFXQ · IT B07JHGKFXQ · ES B07JHGKFXQ
EAN
0711841545291

One number, and the listing does not say which

2,000 kg.

A tie-down strap has two ratings and they are not interchangeable:

Break load — the force at which it fails. It is a test figure and it is never a working figure.

Working load limit (LC) — what it may actually restrain. It is typically about a third of the break load.

This listing publishes 2,000 kg and does not say which it is. The Ohuhu straps in this family publish 1,500 kg break / 500 kg working, which shows exactly the gap between the two.

The label sewn to the webbing carries the real figure, and it is worth reading before the machine goes in the van.

What the listing does publish

Four straps, 4 cm × 2.4 m. An EZ-Release system with a patented end cap stated to protect the ratchet mechanism. Electro-galvanised ratchet, ergonomic padded handle, coated S-hooks. A lifetime replacement warranty.

The padded handle is not a trivial feature

Four straps tensioned properly, in a car park, in February, with cold hands. A bare steel ratchet handle is a blister; a padded one is not.

The coated hooks

An uncoated S-hook against a frame or a footpeg mount takes the paint off it the first time it is tensioned. Coating is a small thing that stops a permanent one.

Never cited anywhere on the page

Any standard. The LoadCare set in this family cites DIN EN 12195-2 with load capacities in daN, which is the European way of stating exactly what this listing leaves open.

Availability

Around 56 € on the German, French, Italian and Spanish Amazon stores, in the single reading behind this page.

Priced in local currency, which the euro range above deliberately leaves out, it also appears on the British Amazon store.

An entry with nobody selling against it sits in the American Amazon catalogue.

What Keepa returned in the single reading behind this page. Availability and prices move without notice.

Prices quoted in this text were read on 18 September 2026. The live price is at the top of the page.

More straps and nets

  • AUGO four-pack ratchet straps with soft loops and bungees

    AUGO 4-R-4-SFTLP

    Four 4.5 m ratchet straps rated at 1,000 kg with rubber-coated S-hooks and moulded handles, supplied with four soft loops, two bungee cords and a storage bag.

    Rating
    1,000 kg, published as "Tragkraft" — the listing does not state whether this is a break load or a working load.
    Length
    4 straps of 4.5 m (from the title)
    Hooks
    S-shaped, rubber-coated, stated not to scratch (maker’s bullet)
    Handles
    A moulding process the maker states ensures the handles never come off (maker’s bullet)
    Extras
    4 soft loops, 2 bungee cords, a storage bag (from the title)
    Standard cited
    None.
    Amazon reference
    B01N2RK6IO (one reference across 6 Amazon marketplaces)
    EAN
    0688474024977
    • Four soft loops AND two bungees in the box, which covers tying down a machine and its loose bits
    • Handles moulded rather than pinned, addressed as its own design point
    • The 1,000 kg figure is not qualified as break or working load

    Best for: A complete transport kit in one box, where the extras matter as much as the straps.

    ≈ $40 / £35 / €29
    Check price on Amazon
  • FORTEM four-pack of ratchet straps with soft loops and bag

    FORTEM FRTM-RTDS

    A set of four 4.57 m ratchet straps published at 748 kg break strength, with stainless steel rubber-gripped handles, four soft loops and a storage bag.

    Break strength
    748 kg — the maker names it as break strength, not a working load (from the title)
    Working load
    Not published — a working figure is typically about a third of a break load.
    Contents
    4 metal ratchet buckles with rubber grips, 4 soft loop straps, 4 heavy-duty S-hook straps 2.54 cm wide, in a bag (maker’s bullet)
    Length
    4 × 4.57 m (from the title)
    Handles
    Rubber-coated stainless steel with a smooth, easy release (maker’s bullet)
    Standard cited
    None.
    Amazon reference
    B081794JZT (one reference across 6 Amazon marketplaces)
    EAN
    0819853025029
    • Names its figure as BREAK strength rather than leaving the type unstated
    • Soft loops and a bag included at the lowest price in this family
    • 748 kg break implies a working figure around a third of that, and it is not published

    Best for: Light loads and occasional transport, where the whole set including loops is the point.

    ≈ $25 / £20 / €21
    Check price on Amazon
  • LoadCare eight-piece motorcycle strap set in blue

    LOADCARE 770105

    An eight-piece motorcycle strap set with four 1.5 m ratchet straps at LC 300 daN and four 0.3 m adapter loops at LC 800 daN, tested to DIN EN 12195-2.

    Load capacity
    Straps LC 300 daN, adapter loops LC 800 daN — tested to DIN EN 12195-2 (maker’s bullet)
    Standard cited
    DIN EN 12195-2, with the company certified to ISO 9001 by DEKRA (maker’s bullet)
    Contents
    4 two-part ratchet straps of 1.5 m with secured S-hooks, plus 4 adapter loops of 0.3 m (maker’s bullet)
    Webbing
    25 mm polyester in grey, stated resistant to abrasion, weather and UV (maker’s bullet)
    Hooks
    S-hooks with a safety catch (maker’s bullet)
    Break load
    Not published — LC is the working figure and it is the one given.
    Amazon reference
    B0H624FBRB (one reference across 5 Amazon marketplaces)
    EAN
    4262429277173
    • The only set here citing a standard AND publishing LC figures in daN
    • Soft adapter loops included, and rated separately from the straps
    • 1.5 m straps are the shortest in this family

    Best for: Transporting a machine where the figures need to mean something specific.

    ≈ €25
    Check price on Amazon

The rest of this rider’s shelf

  • CarBole red clamp-on air filter with splash guard

    CarBole 10805009EUA

    A double-layer clamp-on cone air filter for 38, 39 and 40 mm intakes in stainless steel, rubber and gauze, with a removable splash guard.

    Intake sizes
    38 mm, 39 mm, 40 mm (maker’s bullet)
    Splash guard
    Removable (maker’s bullet)
    Construction
    Double-layer — stainless steel, rubber and gauze (maker’s bullet)
    Stated vehicles
    Motorcycle, scooter, ATV, moped (maker’s bullet)
    Maker’s instruction
    Measure the outside diameter of the carburettor intake manifold before buying (maker’s bullet)
    Washable
    Not stated by the maker — the filter beside it states washable and reusable.
    Amazon reference
    B09T5TPN2Y (one reference across 1 Amazon marketplace)
    • A removable splash guard, which is the part that keeps water out of an exposed filter
    • Three intake sizes named individually
    • Washability is not stated, where the filter beside it publishes it

    Best for: An exposed cone filter on a scooter or small machine that sees rain.

    ≈ €10
    Check price on Amazon
  • Flewdart dual-density air filter foam sheet, red over black

    Flewdart SL-2507-007

    A dual-density air filter foam sheet in A4 format, 10 mm of coarse red over 10 mm of fine black, to cut several filters to size for motorcycles and garden machinery.

    Dimensions
    300 × 210 mm (A4 format), total thickness 20 mm (maker’s bullet)
    Layers
    10 mm red for coarse contaminants over 10 mm black for fine filtration (maker’s bullet)
    Use
    Cut to size with scissors to make several filters (maker’s bullet)
    Stated applications
    Motorcycles, scooters, lawnmowers, garden machinery (maker’s bullet)
    Pore density
    The maker puts nothing in writing on this — the sheet beside it publishes 50 PPI.
    Oil required
    Not addressed by the maker.
    Amazon reference
    B0G3NVV54C (one reference across 1 Amazon marketplace)
    • The two layers are published separately, with a thickness each
    • A4 format makes the yield obvious — you can see how many filters it cuts
    • No pore density published, where the other foam sheet here gives 50 PPI

    Best for: Cutting a replacement element for a machine whose original foam is no longer sold.

    ≈ €10
    Check price on Amazon
  • evermotor red clamp-on motorcycle air filter

    evermotor A10390

    A washable clamp-on cone air filter for 48, 49 and 50 mm carburettor intakes, in stainless steel and gauze, with bendable flanges stated to stretch up to 2 mm between sizes.

    Intake sizes
    48 mm, 49 mm, 50 mm (from the title)
    Flange tolerance
    Bendable flanges stated to absorb vibration and stretch up to 2 mm to fit between sizes (maker’s bullet)
    Construction
    Double-layer, stainless steel and gauze (maker’s bullet)
    Servicing
    Washable and reusable clamp-on filter (maker’s bullet)
    Maker’s instruction
    Measure the outside diameter of the carburettor intake stub before ordering (maker’s bullet)
    Airflow figure
    The maker puts nothing in writing on this.
    Amazon reference
    B07R2DD8LL (one reference across 6 Amazon marketplaces)
    EAN
    0725756144821
    • Publishes a fitting tolerance in millimetres, which is rare on a universal part
    • Tells you exactly what to measure before ordering
    • A cone filter on a carburettor changes the mixture — it is not a drop-in replacement for an airbox

    Best for: A carburettored machine already running a clamp-on filter, replacing a worn one.

    ≈ $10 / €13
    Check price on Amazon

All straps and nets