Skip to content

Battery chargers

Husgw ZYX-J30

An 8 A charger for 12 V and 24 V lead-acid batteries from 2 to 150 Ah, with high- and low-frequency pulse repair, an LCD display and automatic shut-off when full.

Husgw 8 A battery charger with LCD display

Husgw ZYX-J30

An 8 A charger for 12 V and 24 V lead-acid batteries from 2 to 150 Ah, with high- and low-frequency pulse repair, an LCD display and automatic shut-off when full.

Output
8 A at 12 V or 24 V (from the title)
Battery range
12 V / 24 V lead-acid, 2 to 150 Ah (maker’s bullet)
Repair function
High- and low-frequency pulse technology (maker’s bullet)
Display
Large LCD showing charge and battery status (maker’s bullet)
Protection
Under-voltage, short-circuit and over-current protection; ABS housing (maker’s bullet)
Lithium
NOT named — lead-acid only.
Amazon reference
B09DTXCK9D (one reference across 6 Amazon marketplaces)
EAN
0794304347236
  • The only charger here that handles 24 V as well as 12 V
  • The highest current here at 8 A, which suits a larger battery
  • 8 A is more current than a small motorcycle battery wants

Best for: A garage with a car, a van and a motorcycle, where 24 V occasionally turns up.

≈ €28
Check price on Amazon

Specifications

Output
8 A at 12 V or 24 V (from the title)
Battery range
12 V / 24 V lead-acid, 2 to 150 Ah (maker’s bullet)
Repair function
High- and low-frequency pulse technology (maker’s bullet)
Display
Large LCD showing charge and battery status (maker’s bullet)
Protection
Under-voltage, short-circuit and over-current protection; ABS housing (maker’s bullet)
Lithium
NOT named — lead-acid only.
Amazon reference
B09DTXCK9D (one reference across 6 Amazon marketplaces)
EAN
0794304347236

What the seller commits to paper

8 A at 12 V or 24 V, for lead-acid batteries from 2 to 150 Ah. High- and low-frequency pulse repair technology. A large LCD showing charge and battery status, with automatic stop when full. Under-voltage, short-circuit and over-current protection in an ABS housing. A precision temperature-control processor.

24 V is what sets it apart

Every other charger in this family is 6 V and 12 V. This one does 12 V and 24 V, which is truck and commercial territory and useful in a garage that sees more than motorcycles.

The current is the thing to think about

8 A is the highest in this family. It is the right figure for a car or van battery, and it is a lot for a motorcycle one.

The common guideline is to charge at roughly a tenth of a battery’s capacity. A motorcycle battery of 9 Ah wants about 1 A; the Dino charger in this family publishes selectable 1 A programmes for exactly that reason.

This listing publishes 2 to 150 Ah as its range and does not publish a lower selectable current. On a small battery that is the question to resolve before connecting it.

The chemistry list

Lead-acid. No AGM programme is named, no gel, and no lithium.

Availability

Between 28 € and 33 € across the German, French, Italian and Spanish Amazon stores, in the single reading behind this page.

An entry with nobody selling against it sits in the American and British Amazon catalogues.

What Keepa returned in the single reading behind this page. Availability and prices move without notice.

Prices quoted in this text were read on 18 September 2026. The live price is at the top of the page.

More battery chargers

  • NOCO GENIUS5 battery charger with clamps and ring terminals

    NOCO GENIUS5

    A 5 A 6 V/12 V charger, maintainer and desulphator that names lithium LiFePO4 alongside AGM, gel and EFB, charging from 1 volt and with a manual Force mode for 0 V batteries.

    Chemistries
    Lead-acid (AGM, gel, EFB) AND lithium-ion (LiFePO4) — the only listing in this family to name lithium (maker’s bullet)
    Output
    6 V and 12 V, 5 A (from the title)
    Low-voltage start
    Charges from 1 V; a Force mode addresses deeply discharged batteries at 0 V manually (maker’s bullet)
    Temperature
    Integrated thermal sensor adjusting the charge cycle to ambient temperature (maker’s bullet)
    Repair mode
    Detects sulphation and acid stratification automatically, countering both by precise pulse charging (maker’s bullet)
    Supplied and warranty
    Charger, clamps with integrated ring terminals, instructions; 3-year warranty (maker’s bullet)
    Amazon reference
    DE B0828KQKBM · GB B0828KQKBM · FR B083RJZ7VK · IT B0828KQKBM · ES B08435NK3X
    EAN
    0046221190267
    • The only charger here that names LiFePO4 — the chemistry arriving on modern motorcycles
    • Charges from 1 V, with a manual mode for a battery reading zero
    • Not found on the US market, and the ASIN differs between several markets

    Best for: Any motorcycle, and the only obvious choice here if the battery is lithium.

    ≈ €68
    Check price on Amazon
  • Bosch battery charger unit

    Bosch 0189921040

    A battery charger whose listing publishes an effective charging current of 5 A, a voltage figure of 14.7 V and dimensions of 169 × 81 × 54 mm, in two bullets.

    Charging current
    5 A effective (maker’s bullet)
    Voltage
    14.7 V, published by the maker as "input voltage" (maker’s bullet)
    Dimensions
    169 × 81 × 54 mm (maker’s bullet)
    Battery chemistries
    NOT published — no AGM, no gel, no lithium named.
    Charge programme
    The maker puts nothing in writing on this.
    Listing bullets
    Two. One is a compatibility warning; the other is the technical line above.
    Amazon reference
    B0CGJ8TLYZ (one reference across 5 Amazon marketplaces)
    EAN
    4047026640441
    • Publishes physical dimensions, which matters if the charger lives in a fixed place
    • 5 A is a sensible current for a motorcycle battery
    • Publishes no battery chemistry at all — AGM, gel and lithium all want different treatment

    Best for: A rider who already knows this model and is replacing one.

    ≈ €65
    Check price on Amazon
  • Dino KRAFTPAKET 4 A battery charger with display

    Dino KRAFTPAKET 136312

    A 6 V/12 V 4 A automatic charger publishing six named programmes by voltage and current, an eleven-step charge cycle, IP65 protection and a built-in battery tester.

    Programmes
    Six, published individually: 7.2 V-1 A / 7.4 V-1 A / 14.4 V-1 A / 14.7 V-1 A / 14.4 V-4 A / 14.7 V-4 A (maker’s bullet)
    Charge steps
    Eleven, each named: measurement, desulphation, soft start, four constant-current, constant-voltage, float, analysis, maintenance (maker’s bullet)
    Battery types
    Lead-acid, WET, MF, GEL and AGM, 1.2–120 Ah (maker’s bullet)
    Protection
    Reverse-polarity proof, spark-free, IP65 jet-water protected (maker’s bullet)
    Tester
    Shows battery voltage; works on 12 V without mains, 6 V needs mains (maker’s bullet)
    Lithium
    NOT named — the chemistries listed are all lead-based.
    Amazon reference
    B07KSFBMXF (one reference across 5 Amazon marketplaces)
    EAN
    4003342177962
    • Publishes six programmes by voltage AND current — nothing else here is that specific
    • Names all eleven charge steps, so what the charger is doing is legible
    • No lithium chemistry — the list is entirely lead-based

    Best for: A lead-acid, gel or AGM motorcycle battery where you want to see what the charger is doing.

    ≈ €30
    Check price on Amazon

The rest of this rider’s shelf

  • MANNOL 3002 DOT-4 brake fluid five-litre container

    MANNOL 3002 DOT-4, 5 L

    A five-litre DOT-4 hydraulic fluid published to SAE J1703/J1704, ISO 4925 Class 3/4 and FMVSS 116 DOT 3/4, stated for conventional brake and clutch systems.

    Specifications
    SAE J1703/J1704, ISO 4925 Class 3/4, FMVSS 116 DOT 3/4 (maker’s bullet)
    Stated use
    All conventional hydraulic BRAKE AND CLUTCH systems (maker’s bullet)
    Volume
    5 litres (from the title)
    Viscosity
    Stated excellent viscosity-temperature behaviour — no figure given (maker’s bullet)
    Protection
    Stated to prevent vapour lock and protect against corrosion and oxidation (maker’s bullet)
    Boiling points
    The maker puts nothing in writing on this.
    Amazon reference
    B00GHXBIJG (one reference across 4 Amazon marketplaces)
    EAN
    4036021889429
    • Three standards published, including the ISO class
    • Names hydraulic CLUTCH systems explicitly, which many motorcycles have
    • No boiling point published

    Best for: A machine with a hydraulic clutch as well as hydraulic brakes, both bled at once.

    ≈ €33
    Check price on Amazon
  • Brembo 07BB03SA brake pad set in red

    Brembo 07BB03SA

    Front and rear brake pads published with thickness, height and width in millimetres and an SA friction quality code, fitting a far wider list of machines than the title names.

    Thickness
    7.7 and 7.6 mm (maker’s bullet)
    Height
    40.1 mm (maker’s bullet)
    Width
    108.5 mm (maker’s bullet)
    Friction quality
    SA (maker’s bullet)
    Position
    Front AND rear (maker’s bullet)
    Title against bullets
    The title names one marque. The compatibility bullet names BMW, Moto Morini, KTM, Royal Enfield, Honda, CF Moto and Aprilia among others.
    Amazon reference
    B005EWT38E (one reference across 6 Amazon marketplaces)
    EAN
    5700751012325
    • Four measurements published — thickness, height, width and a friction quality code
    • A one-working-day compatibility check against a vehicle identification number
    • The title names a single marque where the bullets name at least seven

    Best for: Anyone cross-referencing brake pads by dimension rather than by part number.

    ≈ £40 / €37
    Check price on Amazon
  • JRL brake pad pair for small-capacity machines

    JRL Am-MB0294

    A set of two brake pads for 47 and 49 cc scooters, mini bikes, pocket bikes, choppers and quads, whose dimensions bullet refers the buyer to the photograph.

    Stated fitment
    47 and 49 cc gas scooters, bicycles, mini motorcycles, pocket bikes, choppers, quads (maker’s bullet)
    Dimensions
    "See the picture" — the maker’s own bullet gives no figure.
    Supplied
    1 set, 2 pieces (maker’s bullet)
    Friction material
    The maker puts nothing in writing on this.
    Thickness
    The maker puts nothing in writing on this.
    Listing bullets
    Three.
    Amazon reference
    B01A0BAAF8 (one reference across 5 Amazon marketplaces)
    EAN
    0603589177981
    • The piece count is unambiguous — a set of two
    • The least expensive brake pads here
    • Publishes no dimension at all, on a part that fits only if it is the right size

    Best for: A rider matching pads against the ones already in the caliper, with the old set in hand.

    ≈ €7
    Check price on Amazon

All battery chargers