Skip to content

Chain kits

2EXTREME 4200868

A chain and sprocket kit for the Derbi Senda, GPR and Gilera SMT 50, at stock gearing of 11 and 53 teeth, with a 140-link 420 chain and a clip joining link.

2EXTREME chain kit for Derbi and Gilera 50 cc machines

2EXTREME 4200868

A chain and sprocket kit for the Derbi Senda, GPR and Gilera SMT 50, at stock gearing of 11 and 53 teeth, with a 140-link 420 chain and a clip joining link.

Pitch
420 (maker’s bullet)
Gearing
Front sprocket 11 teeth, rear sprocket 53 teeth — stated as the factory ratio (maker’s bullet)
Chain length
140 links (maker’s bullet)
Joining link
Clip link (maker’s bullet)
Stated fitment
Derbi Senda, Derbi GPR, Gilera SMT 50 (from the title)
Ring type
Not published — no O-, X- or Z-ring is stated.
Amazon reference
B09C8S2C4R (one reference across 2 Amazon marketplaces)
EAN
4064553034925
  • The only kit here that publishes pitch, both sprocket counts, chain length AND the joining link type
  • States the gearing is the factory ratio, so the speedometer stays honest
  • A clip link is the weaker of the two joining methods

Best for: A Derbi Senda, GPR or Gilera SMT 50 going back to standard gearing.

≈ €41
Check price on Amazon

Specifications

Pitch
420 (maker’s bullet)
Gearing
Front sprocket 11 teeth, rear sprocket 53 teeth — stated as the factory ratio (maker’s bullet)
Chain length
140 links (maker’s bullet)
Joining link
Clip link (maker’s bullet)
Stated fitment
Derbi Senda, Derbi GPR, Gilera SMT 50 (from the title)
Ring type
Not published — no O-, X- or Z-ring is stated.
Amazon reference
B09C8S2C4R (one reference across 2 Amazon marketplaces)
EAN
4064553034925

What the seller commits to paper

Pitch 420. Front sprocket 11 teeth. Rear sprocket 53 teeth, stated as the factory ratio. Chain length 140 links. Clip link. For the Derbi Senda, Derbi GPR and Gilera SMT 50.

Five bullets. Five specifications.

The most completely specified chain kit here

Pitch, both tooth counts, chain length in links and the joining link type. That is the complete description of a chain kit, and nothing else in this family gives all four.

It matters because the parts are interdependent: gearing changes the chain length needed, pitch has to match across all three components, and the joining link is what actually holds the whole thing together.

A clip link is held by a sprung clip pushed over the pin ends. It goes on with pliers and it comes off the same way, which is convenient and is why it is normal on small machines.

A rivet link is peened over with a chain tool and does not come off. On a machine with real power or real weight it is the only acceptable answer, and this kit does not carry one.

The rows this seller leaves empty

Any ring type. O-, X- and Z-rings seal grease into the chain’s bearing surfaces and multiply its life. A chain with none is a plain chain, cheaper and shorter-lived, and the listing is silent either way.

Availability

Between 41 € and 49 € across the German and French Amazon stores, in the single reading behind this page.

Nothing whatever came back from the American, British, Italian and Spanish Amazon stores, so the buy button there opens a search instead of an empty page.

What Keepa returned in the single reading behind this page. Availability and prices move without notice.

Prices quoted in this text were read on 18 September 2026. The live price is at the top of the page.

More chain kits

  • Akozon 420 chain and sprocket kit for ATV and quad

    Akozon 420 15T/37T

    A 420-pitch chain and sprocket kit with 15 front and 37 rear teeth in 45 steel and steel alloy, whose own bullet translates the tooth counts as tonnes.

    Pitch
    420 (from the title)
    Gearing
    15 teeth front, 37 teeth rear (from the title). The maker’s own bullet renders these as "a 15-tonne front sprocket" and "a 37-tonne rear sprocket" — a machine translation of 15T and 37T.
    Material
    45 steel and steel alloy, stated for strength, hardness and resistance to splitting (maker’s bullet)
    Contents
    Front sprocket, rear sprocket and 420 chain (maker’s bullet)
    Stated vehicles
    Pit, Pro, Trail, Dirt, Pocket, ATV quads (maker’s bullet)
    Maker’s instruction
    Confirm compatibility with your vehicle before buying, to avoid returns (maker’s bullet)
    Amazon reference
    B0DTJCBQHK (one reference across 5 Amazon marketplaces)
    • Names the steel grade — 45 steel — which no other kit in this family does
    • Contents itemised as three pieces
    • Its own bullets describe the sprockets in tonnes, which is a mistranslation of the tooth counts in its own title

    Best for: An ATV or quad on 420 chain, where the steel grade matters more than the prose.

    ≈ £18
    Check price on Amazon
  • EVGATSAUTO 420 chain and sprocket kit

    EVGATSAUTO 420 chain kit 37/17

    A 420-pitch chain and sprocket kit with 17 front and 37 rear teeth, published for 17 mm countershafts on 50 to 125 cc dirt bikes, mini bikes, ATVs and go-karts.

    Pitch
    420 (from the title)
    Gearing
    17 teeth front, 37 teeth rear (from the title)
    Front sprocket
    0.235 inch thick, 17T; centre mounting holes 1.18 inch apart; compatible with 17 mm engine countershafts (maker’s bullet)
    Treatment
    Sprockets heat-treated, stated to increase strength and wear resistance (maker’s bullet)
    Stated vehicles
    50 cc to 125 cc dirt bikes, mini bikes, ATVs, four-wheel go-karts (maker’s bullet)
    Supplied
    Front sprocket with mounting bolts (maker’s bullet)
    Amazon reference
    B0B2PVTNVP (one reference across 5 Amazon marketplaces)
    • Publishes the countershaft diameter — 17 mm — which is the measurement that decides whether the front sprocket goes on
    • Sprocket thickness and bolt spacing both given
    • Chain length in links is not published, and it is the other half of a chain kit

    Best for: A 50–125 cc machine with a 17 mm countershaft, replacing a worn 420 set.

    ≈ €31
    Check price on Amazon
  • Tiardey 25H sprocket and chain set

    Tiardey CP101125

    A front and rear sprocket set for tuned go-karts, ATVs and mini bikes, with a 55-tooth rear sprocket of 29 mm, a 12-tooth front and a 146-link chain.

    Chain type
    25H / 25L (from the title)
    Rear sprocket
    55 teeth, 29 mm (from the title)
    Front sprocket
    12 teeth (from the title)
    Chain length
    146 links (from the title)
    Stated vehicles
    Tuned go-karts, ATVs, motocross and mini bikes (maker’s bullet)
    Material
    The maker puts nothing in writing on this.
    Amazon reference
    B0DQCLFPVL (one reference across 6 Amazon marketplaces)
    • Publishes both tooth counts, the rear bore and the chain length — in the title
    • The least expensive chain kit here, on six marketplaces
    • No material published on a wearing part

    Best for: A go-kart or mini bike running 25H chain, where acceleration is the point.

    ≈ £10 / €11
    Check price on Amazon

The rest of this rider’s shelf

  • Liqui Moly Motorbike white chain spray 400 ml

    Liqui Moly Motorbike chain spray white

    A 400 ml white adhesive chain lubricant published as copper-free, with stated creep capability, resistance to cold, heat and splash water, and high load capacity.

    Volume
    400 ml (from the title)
    Composition
    Adhesive lubricant WITHOUT copper (from the title)
    Creep
    Stated excellent creep capability (maker’s bullet)
    Temperature and water
    Stated excellent cold, heat and splash-water resistance (maker’s bullet)
    Fling resistance
    Stated fling-resistant (maker’s bullet)
    Ring compatibility
    Not published in these bullets — two other lubricants in this family state theirs.
    Amazon reference
    B00295GOU4 (one reference across 6 Amazon marketplaces)
    EAN
    4100420015915
    • Publishes that it is copper-free, which is a composition statement rather than a performance claim
    • Creep capability named separately from adhesion — they are opposite requirements
    • Ring compatibility is not stated in these bullets, and it is the one hard requirement

    Best for: A chain that needs the lubricant to travel into the rollers before it sets.

    ≈ €9
    Check price on Amazon
  • Motul chain care set with C4, C1 and cleaning brush

    Motul C4 + C1 + brush set

    A three-piece chain care set — C4 lubricant, C1 cleaner and a brush — whose three listing bullets are a product name, a product type and a brand name.

    Contents
    Motul C4 400 ml + Motul C1 400 ml + a chain cleaning brush (from the title)
    Ring compatibility
    NOT published — every other lubricant in this family states O-, X- and Z-ring suitability.
    Product type
    "Machine lubricant" (maker’s bullet)
    Brand
    Motul (maker’s bullet)
    Listing bullets
    Three. The first names the set as a "chain cleaning and PAIN RELIEF set" — a machine translation of Schmier (lubricate) as Schmerz (pain).
    Fling resistance
    The maker puts nothing in writing on this.
    Amazon reference
    B01MQUAF59 (one reference across 6 Amazon marketplaces)
    EAN
    8052740259127
    • Cleaner and lubricant together, which is how a chain is actually serviced
    • A brush included, and the brush is the part people never buy separately
    • Publishes no ring compatibility — the one requirement a chain lubricant has

    Best for: A rider who already knows these two products and wants them with a brush.

    ≈ €22
    Check price on Amazon
  • NIGRIN MOTO-BIKE chain spray six-pack of 400 ml cans

    NIGRIN MOTO-BIKE Dry Lube, 6 × 400 ml

    A six-pack of 400 ml fully synthetic transparent dry chain lube for O-, Z- and X-ring chains, stated not to change the chain colour and to resist flinging at speed.

    Quantity
    6 × 400 ml — 2.4 litres (from the title)
    Type
    Fully synthetic dry lube, transparent (maker’s bullet)
    Ring compatibility
    All motorcycle and ATV chains including O-, Z- and X-ring, road and off-road (maker’s bullet)
    Appearance
    Transparent — stated not to change the chain colour (maker’s bullet)
    Fling resistance
    Stated to hold its lubricating effect at high speed through high fling resistance (maker’s bullet)
    Protection
    Stated to protect against shock loading and metal-on-metal wear (maker’s bullet)
    Amazon reference
    B08JCM4TMF (one reference across 3 Amazon marketplaces)
    EAN
    4008153028571
    • Six cans, which is a year or more of chain servicing bought at once
    • Transparent rather than white, so chain wear stays visible
    • Not found on the UK, US or Spanish markets at the time of collection

    Best for: Servicing a chain every fortnight, where running out is the reason it gets skipped.

    ≈ €29
    Check price on Amazon

All chain kits