Skip to content

Anti-fog inserts

Everalo Pins 5 mm

A set of two pairs of 5 mm visor pins for six helmet brands, compatible with standard 5 mm pin visors and explicitly not with oversized tear-off pins.

Everalo 5 mm visor pins, two pairs

Everalo Pins 5 mm

A set of two pairs of 5 mm visor pins for six helmet brands, compatible with standard 5 mm pin visors and explicitly not with oversized tear-off pins.

Quantity
2 pairs, so a spare set is on hand (maker’s bullet)
Pin size
5 mm (from the title)
Stated brands
AGV, HJC, Airoh, Nolan, LS2, Givi (from the title)
Explicitly excluded
Visors with oversized tear-off pins (maker’s bullet)
Material
The maker puts nothing in writing on this.
Insert included
No — these are the pins, not the anti-fog lens.
Amazon reference
B0DR37QT3Z (one reference across 6 Amazon marketplaces)
EAN
8050628472279
  • Two pairs, because the part that gets lost is the one you drop on a garage floor
  • Publishes what it does NOT fit, which is the useful half of a compatibility claim
  • Pins only — the anti-fog insert itself is a separate purchase

Best for: Replacing pins lost or stripped when changing an anti-fog insert.

≈ €12
Check price on Amazon

Specifications

Quantity
2 pairs, so a spare set is on hand (maker’s bullet)
Pin size
5 mm (from the title)
Stated brands
AGV, HJC, Airoh, Nolan, LS2, Givi (from the title)
Explicitly excluded
Visors with oversized tear-off pins (maker’s bullet)
Material
The maker puts nothing in writing on this.
Insert included
No — these are the pins, not the anti-fog lens.
Amazon reference
B0DR37QT3Z (one reference across 6 Amazon marketplaces)
EAN
8050628472279

What the seller commits to paper

Two pairs of 5 mm pins, stated for AGV, HJC, Airoh, Nolan, LS2 and Givi, compatible with standard 5 mm pin visors — and not with models using oversized tear-off pins.

Two bullets, and one of them is an exclusion. That is a higher ratio of useful information than most listings on this shelf manage in six.

What a pin is for

An anti-fog insert does not stick to a visor. It clips onto two posts and is tensioned against the visor by turning them, and that tension is what makes the seal that stops fogging. A stripped or missing pin is an insert that rattles instead of sealing.

What this is not

The insert. These are the posts; the anti-fog lens is a separate part and a separate purchase. Two other listings in this family sell the lens without the pins, which is the same division from the other side.

Availability

Between 12 € and 14 € across the German, French, Italian and Spanish Amazon stores, in the single reading behind this page.

An entry with nobody selling against it sits in the American and British Amazon catalogues.

What Keepa returned in the single reading behind this page. Availability and prices move without notice.

Prices quoted in this text were read on 18 September 2026. The live price is at the top of the page.

What this fits

More anti-fog inserts

  • Namvo two-pack anti-fog film for helmet visors

    Namvo BZ02144

    A two-pack of micro-nano coated PET anti-fog film measuring 8.8 × 24.5 cm, with a stated service life of over three years and an explicit exclusion for bubble visors.

    Quantity
    2-pack (from the title)
    Dimensions
    8.8 × 24.5 cm (maker’s bullet)
    Material
    Micro-nano coated PET (maker’s bullet)
    Stated service life
    More than 3 years (maker’s bullet)
    Stated fitment
    Full-face, half, off-road helmets and goggles — NOT bubble visors (maker’s bullet)
    Fixing
    Strong adhesive on the back (maker’s bullet)
    Amazon reference
    B09Z2L7GNG (one reference across 5 Amazon marketplaces)
    EAN
    0610012469544
    • Publishes a service life in years, which nothing else in this family does
    • Dimensions published, and an exclusion published beside them
    • The service life figure carries no stated test condition

    Best for: A first attempt at an adhesive anti-fog film, where having a second one in the packet is the real feature.

    ≈ £5 / €6
    Check price on Amazon
  • Pinlock original replacement pins for helmet visors

    Pinlock 000388

    Original Pinlock replacement pins for visors with 5 mm holes, supplied as four sets of three parts — the spare part from the maker of the system itself.

    Fits
    Visors with 5 mm holes, for standard Pinlock inserts (from the title)
    Origin
    Original spare part from Pinlock (maker’s bullet)
    Quantity
    3 parts, 4 sets (from the title)
    Insert included
    No — these are the pins only.
    Material
    The maker puts nothing in writing on this.
    Listing bullets
    One, of fifteen words.
    Amazon reference
    B07NJ1F8QG (one reference across 6 Amazon marketplaces)
    EAN
    0731628294358
    • The original part from the company that invented the system, which removes the fit question entirely
    • Four sets, so a helmet and its spares are covered for years
    • A single bullet of fifteen words is the whole listing

    Best for: A rider who wants the original pins rather than a compatible copy.

    ≈ £8 / €15
    Check price on Amazon
  • SZMYLED anti-fog film for a motorcycle helmet visor

    SZMYLED Anti-fog film

    A universal anti-fog film stated to suit full-face, half and open-face helmets, made of an abrasion-resistant material — with no dimensions published anywhere in the listing.

    Dimensions
    NOT published by the maker — and on a part cut to an aperture, this is the deciding figure.
    Stated fitment
    Most helmets — full-face, half and open-face (maker’s bullet)
    Material
    A special material with the anti-fog function built in during production (maker’s bullet)
    Properties
    Rain-resistant and abrasion-resistant (maker’s bullet)
    Fitting
    Stated to be inserted into any helmet visor (maker’s bullet)
    Durability figure
    The maker puts nothing in writing on this.
    Amazon reference
    B08KSV45XD (one reference across 5 Amazon marketplaces)
    EAN
    6955154563076
    • The least expensive anti-fog product in this family on its home market
    • The anti-fog property is stated to be in the material rather than a coating on it
    • NO dimensions published, which is the only figure that decides whether it fits

    Best for: A buyer prepared to measure on arrival and return it if the size is wrong.

    ≈ €7
    Check price on Amazon

The rest of this rider’s shelf

  • ETENWOLF digital tyre pressure gauge with backlit display

    ETENWOLF ITAU-440-348

    A digital tyre pressure gauge reading 0.2 to 13.8 bar, individually calibrated to ANSI B40.7 grade 2A at ±0.06 bar, with thermal compensation and replaceable AAA batteries.

    Accuracy
    Hand-calibrated to ANSI B40.7 grade 2A — ±0.06 bar (maker’s bullet)
    Range
    0.2 to 13.8 bar (maker’s bullet)
    Accuracy at the extremes
    Stated accurate below 0.82 bar and above 9.65 bar (maker’s bullet)
    Temperature
    Thermal compensation, stated to work in extreme cold and heat (maker’s bullet)
    Power
    Replaceable AAA batteries, backlit display and lit nozzle (maker’s bullet)
    Valve exception
    Measures all vehicle types EXCEPT the Dunlop valve; no Presta adapter is included (maker’s bullet)
    Amazon reference
    B0C1GHMX8V (one reference across 6 Amazon marketplaces)
    EAN
    8434402721881
    • The tightest published tolerance here by five times, cited against a named standard
    • Replaceable AAA batteries rather than a sealed cell
    • Measures only — it cannot inflate

    Best for: Checking pressures cold before a ride, to a figure you can trust.

    ≈ €9
    Check price on Amazon
  • HAZET 9041-1 tyre inflator gauge with rubber-shielded dial

    Hazet 9041-1

    A tyre inflating gauge reading 0 to 12 bar with a published measuring tolerance of 0.3 bar, a 400 mm flexible hose and one-handed trigger and release operation.

    Range
    0–12 bar (from the title)
    Measuring tolerance
    ±0.3 bar (from the title and maker’s bullet)
    Hose
    Flexible, 400 mm, with an integrated quick coupler (maker’s bullet)
    Operation
    Handle with trigger and release button, for one-handed use (maker’s bullet)
    Protection
    Rubber shield protecting the dial against light knocks (maker’s bullet)
    Origin
    Made in Germany, stated for professional use (maker’s bullet)
    Amazon reference
    B001C9Z440 (one reference across 6 Amazon marketplaces)
    EAN
    4000896147076
    • Publishes its tolerance, which is the only real specification a pressure gauge has
    • One-handed operation with a release button — inflate and bleed without a second hand
    • ±0.3 bar is a wide tolerance — on a 2.5 bar motorcycle tyre that is 12%

    Best for: A workshop air line, where the inflator and the gauge are one tool.

    ≈ €25
    Check price on Amazon
  • MICHELIN digital tyre pressure gauge with tread depth probe

    MICHELIN 009526

    A digital tyre pressure gauge reading 0.4 to 6.8 bar with a built-in tread depth gauge measuring 0 to 15 mm, a large backlit LCD and a user-replaceable CR2032 cell.

    Pressure range
    0.4 to 6.8 bar (maker’s bullet)
    Tread depth range
    0 to 15 mm (maker’s bullet)
    Display
    Large LCD, stated readable in poor light (maker’s bullet)
    Battery
    CR2032, user-replaceable from a compartment on the back (maker’s bullet)
    Stated vehicles
    Car, motorcycle, caravan, trailer, bicycle (maker’s bullet)
    Tolerance
    NOT published — the ETENWOLF gauge in this family publishes ±0.06 bar.
    Amazon reference
    DE B00KEJSI6A · US B08KJN6SKX · GB B00KEJSI6A · FR B00KEJSI6A · IT B00KEJSI6A · ES B00KEJSI6A
    EAN
    3221320095263
    • Two instruments in one — pressure and tread depth are the two legal checks on a tyre
    • Publishes the tread depth range as well as the pressure range
    • No accuracy tolerance published, on a measuring instrument

    Best for: Pre-ride checks where the tread is inspected at the same time as the pressure.

    ≈ €15
    Check price on Amazon

All anti-fog inserts