Skip to content

Oil filters

MANN-FILTER MW 64/1

A spin-on oil filter published with five separate measurements — outer diameter, both seal diameters, thread and height — the most completely dimensioned filter in this catalogue.

MANN-FILTER MW 64/1 spin-on oil filter

MANN-FILTER MW 64/1

A spin-on oil filter published with five separate measurements — outer diameter, both seal diameters, thread and height — the most completely dimensioned filter in this catalogue.

Thread
M20×1.5 (maker’s bullet)
Outer diameter
66 mm (maker’s bullet)
Seal inner diameter
54 mm (maker’s bullet)
Seal outer diameter
62 mm (maker’s bullet)
Height
65 mm (maker’s bullet)
Cross-reference
By brand, model, vehicle type and engine, or by the HSN/TSN numbers from the registration document (maker’s bullet)
Amazon reference
B005NFYJ22 (one reference across 6 Amazon marketplaces)
EAN
4011558844806
  • Five measurements published, including both seal diameters — nothing else here publishes the seal
  • Cross-reference by registration-document numbers, which removes the guesswork entirely
  • Its M20×1.5 thread differs from the M20×1.0 of the filter beside it at almost the same size

Best for: Confirming a filter against measurements before ordering, rather than after opening the box.

≈ €7
Check price on Amazon

Specifications

Thread
M20×1.5 (maker’s bullet)
Outer diameter
66 mm (maker’s bullet)
Seal inner diameter
54 mm (maker’s bullet)
Seal outer diameter
62 mm (maker’s bullet)
Height
65 mm (maker’s bullet)
Cross-reference
By brand, model, vehicle type and engine, or by the HSN/TSN numbers from the registration document (maker’s bullet)
Amazon reference
B005NFYJ22 (one reference across 6 Amazon marketplaces)
EAN
4011558844806

What the seller commits to paper

Outer diameter (A) = 66 mm. Seal inner diameter (B) = 54 mm. Seal outer diameter (C) = 62 mm. Thread (G) = M20×1.5. Height (H) = 65 mm.

Five measurements, each labelled, in one line. It is the most completely dimensioned part in this whole catalogue.

The seal diameters are the ones nobody else gives

A spin-on filter seals on a rubber ring that presses against a machined face on the engine. If that ring is too small it sits on nothing; too large and it hangs over the edge. Either way, oil leaves under pressure.

Publishing 54 mm inner and 62 mm outer answers a question no other filter listing on this shelf acknowledges exists.

And the thread, against its neighbour

M20×1.5 here. M20×1.0 on the MAHLE filter in this same family, at 68 mm diameter and 65 mm height against 66 and 65.

Two millimetres of diameter, identical height, different pitch. Read together, the two listings are a demonstration of why a filter is bought by cross-reference and not by eye.

Cross-reference by registration number

By brand, model, type and engine — or by the HSN/TSN from the vehicle document, which names the exact machine. That is the route with no guesswork in it.

Availability

Between 7 € and 11 € across the German, French, Italian and Spanish Amazon stores, in the single reading behind this page.

Priced in local currency, which the euro range above deliberately leaves out, it also appears on the American and British Amazon stores.

What Keepa returned in the single reading behind this page. Availability and prices move without notice.

Prices quoted in this text were read on 18 September 2026. The live price is at the top of the page.

More oil filters

  • HifloFiltro HF204 black spin-on oil filter

    HifloFiltro HF204

    A vehicle-specific spin-on oil filter published with a 65 mm filter-wrench size and an edged wrench fitting — the figure you need to buy the right tool.

    Filter wrench size
    65 mm (maker’s bullet)
    Wrench fitting type
    Edges (maker’s bullet)
    Fitment
    Vehicle-specific (maker’s bullet)
    Dimensions
    Not published in this listing.
    Thread size
    Not published in this listing.
    Listing bullets
    Three, of which two are numbers.
    Amazon reference
    B000WJB4HW (one reference across 6 Amazon marketplaces)
    EAN
    0765588230705
    • Publishes the wrench size, which is what you need to buy the tool before the oil is drained
    • Names the wrench fitting type, not just the size
    • No dimensions and no thread size

    Best for: A rider who already knows HF204 is their filter and wants the wrench size before starting.

    ≈ $8 / £7 / €12
    Check price on Amazon
  • K&N KN-141 red cartridge oil filter

    K&N KN-141

    A 38 × 46 mm cartridge oil filter for eight named marques, supplied with an O-ring already greased for fitting, compatible with the latest synthetic oils.

    Dimensions
    38 × 46 mm cartridge (from the title)
    Type
    Cartridge — it fits inside a housing, unlike a spin-on filter
    O-ring
    Supplied pre-greased for fitting (maker’s bullet)
    Stated fitment
    Beta, Yamaha, Fantic, HM Moto, MBK, TM, Rieju, Gas Gas (from the title)
    Oil compatibility
    Compatible with the latest synthetic engine oils (maker’s bullet)
    Model list
    In the product description rather than the bullets (maker’s bullet)
    Amazon reference
    B000E28N5I (one reference across 6 Amazon marketplaces)
    EAN
    0024844099938
    • A pre-greased O-ring, which is the part people fit dry and then leak from
    • Eight marques named in the title
    • A cartridge needs the housing opened, which is a different job from a spin-on

    Best for: Off-road and small-capacity machines with a cartridge filter housing.

    ≈ $12 / £9 / €8
    Check price on Amazon
  • K&N KN-204-1 spin-on motorcycle oil filter

    K&N KN-204-1

    A 66 × 71 mm spin-on oil filter for selected Honda, Kawasaki, Triumph and Yamaha machines, with pleated synthetic-blend media and a nut welded on for removal.

    Dimensions
    66 × 71 mm cartridge (from the title)
    Stated fitment
    Selected Honda, Kawasaki, Triumph and Yamaha machines — the compatible models are in the listing description (maker’s bullet)
    Media
    Pleated synthetic-blend filtration media (maker’s bullet)
    Oil compatibility
    Stated to work with all synthetic, conventional and blended engine oils (maker’s bullet)
    Removal
    Nut for quick removal with a spanner (maker’s bullet)
    Thread size
    Not published in this listing.
    Amazon reference
    B008S6GEB2 (one reference across 6 Amazon marketplaces)
    EAN
    0024844368140
    • The removal nut is the difference between a five-minute job and a punctured filter
    • Dimensions published in the title
    • No thread size published, and two filters in this family publish different threads at almost identical dimensions

    Best for: A Honda, Kawasaki, Triumph or Yamaha on the maker’s list, changed at home without a filter wrench.

    ≈ €9
    Check price on Amazon

The rest of this rider’s shelf

  • Grefay FL216 handlebar phone holder

    Grefay FL216

    A handlebar phone holder with a tool-free quick-release clamp, auto-retracting arms, thick silicone at the corners and 360-degree rotation.

    Mounting
    Quick-release clamp, no tools — press a button to open (maker’s bullet)
    Operation
    Auto-retracting arms; press down with the phone to lock (maker’s bullet)
    Protection
    Thick silicone resin on the four corners and the contact surface (maker’s bullet)
    Rotation
    360° (maker’s bullet)
    Device size range
    NOT published — the Lamicall listing carrying the same text publishes 4.7–6.8 inch.
    Identical listing text
    Three of these bullets appear word for word in the Lamicall listing in this same family, under a different brand and a different reference.
    Amazon reference
    B0BVZLXR81 (one reference across 1 Amazon marketplace)
    • Tool-free clamp and one-handed operation
    • The least expensive mount in this family
    • Publishes no device size range and no handlebar diameter

    Best for: A bicycle or a scooter where the phone is a known fit and vibration is low.

    ≈ €14
    Check price on Amazon
  • JOYROOM motorcycle phone mount with pneumatic damper

    JOYROOM Motorcycle mount

    A phone mount using a two-chamber pneumatic damping system stated to absorb up to 95% of vibration, taking 4.7 to 7 inch phones with cases up to 18 mm thick.

    Damping
    Pneumatic two-chamber system, stated to absorb up to 95% — described by the maker as different from passive spring dampers (maker’s bullet)
    Device size
    4.7 to 7 inch, including thicker cases up to 18 mm (maker’s bullet)
    Construction
    Tie rods and ball heads in glass-fibre-reinforced nylon (maker’s bullet)
    Locking
    One-second quick lock — press the phone onto the centre button; release with the side clamps (maker’s bullet)
    Protection
    Non-slip silicone pads on the mounting surface and the clamp arms (maker’s bullet)
    Handlebar diameter
    The maker puts nothing in writing on this.
    Amazon reference
    B0G7T6D8KS (one reference across 1 Amazon marketplace)
    • The only mount here publishing a damping figure, and it names the mechanism
    • Takes cases up to 18 mm, which is 3 mm more than the other damped mount here
    • The 95% figure carries no stated frequency or test condition

    Best for: A single-cylinder or twin with real vibration, carrying a phone with a thick case.

    ≈ €30
    Check price on Amazon
  • Lamicall BP07 handlebar phone holder

    Lamicall BP07

    A handlebar phone holder for 4.7 to 6.8 inch devices with a quick-release clamp, one-handed operation and thick silicone at the four corners.

    Device size
    4.7 to 6.8 inch phones and GPS devices (maker’s bullet)
    Mounting
    Quick-release clamp, no tools — press a button to open (maker’s bullet)
    Operation
    Auto-retracting arms; press down with the phone to lock (maker’s bullet)
    Protection
    Thick silicone resin on the four corners and the contact surface (maker’s bullet)
    Vibration damping
    NOT published — two mounts in this family publish a damping system.
    Identical listing text
    Three of this listing’s bullets appear word for word in the Grefay listing in this same family, under a different brand and a different reference.
    Amazon reference
    B09MT4N4HW (one reference across 6 Amazon marketplaces)
    EAN
    8435611497888
    • Tool-free quick-release clamp, so it moves between machines
    • Published on all six marketplaces at a consistent price
    • No vibration damping published — the thing that damages a phone camera on a motorcycle

    Best for: A scooter or a low-vibration machine, or a bicycle, where damping is not the issue.

    ≈ $19 / £17 / €18
    Check price on Amazon

All oil filters