Skip to content

Paddock stands

XPOtool 63296

A front wheel rocker stand in powder-coated steel for 17, 19 and 21 inch wheels with tyres 60 to 120 mm wide, with non-slip rubber feet and pre-drilled fixing holes.

XPOtool front wheel rocker stand for motorcycles

XPOtool 63296

A front wheel rocker stand in powder-coated steel for 17, 19 and 21 inch wheels with tyres 60 to 120 mm wide, with non-slip rubber feet and pre-drilled fixing holes.

Wheel sizes
17″, 19″ and 21″ (maker’s bullet)
Tyre width
60 to 120 mm (maker’s bullet)
Mechanism
Rocker — the wheel is ridden into it and it tips upright, with no second person (maker’s bullet)
Material
Powder-coated steel, stated for all weather conditions (maker’s bullet)
Feet
Non-slip rubber caps, stated to protect floor coverings (maker’s bullet)
Fixing
Pre-drilled holes to bolt it down (maker’s bullet)
Amazon reference
B0BS9RMZ1B (one reference across 5 Amazon marketplaces)
EAN
4251548134597
  • The only stand here that can be bolted to a trailer floor — pre-drilled holes are published
  • Wheel diameter AND tyre width both given
  • A 60–120 mm tyre width rules out wide front tyres

Best for: Transporting a machine in a van or on a trailer, where it has to stand up on its own.

≈ £53 / €51
Check price on Amazon

Specifications

Wheel sizes
17″, 19″ and 21″ (maker’s bullet)
Tyre width
60 to 120 mm (maker’s bullet)
Mechanism
Rocker — the wheel is ridden into it and it tips upright, with no second person (maker’s bullet)
Material
Powder-coated steel, stated for all weather conditions (maker’s bullet)
Feet
Non-slip rubber caps, stated to protect floor coverings (maker’s bullet)
Fixing
Pre-drilled holes to bolt it down (maker’s bullet)
Amazon reference
B0BS9RMZ1B (one reference across 5 Amazon marketplaces)
EAN
4251548134597

What the seller commits to paper

For wheels of 17″, 19″ and 21″ with tyre widths of 60 to 120 mm. A rocker mechanism stated to let the front wheel be raised without help from a second person. Powder-coated steel for all weather. Non-slip rubber caps protecting floor coverings. Pre-drilled holes for bolting down.

The rocker, and why it needs no lifting

The machine is ridden or pushed forward into the cradle. The cradle tips under the wheel and falls upright, trapping the wheel between its rails. The bike then stands on its own.

Nothing is lifted. Nobody holds the other side. It is the one stand in this family that a person alone can use without the machine being balanced first.

The pre-drilled holes are the real feature

Bolt this to a van or trailer floor and it becomes a transport chock: the front wheel is captive, the machine stands upright, and straps do the rest.

That is how motorcycles are moved properly, and it is the only stand in this family published as able to do it.

What it does not do

It holds the front wheel. Front wheel removal, fork work and front tyre changes all need the front of the machine held some other way, and this stand is holding the exact part that has to come off.

The width limit

60 to 120 mm is a front tyre range. Wide front tyres sit outside it, and it is a measurement worth taking before ordering.

Availability

Between 51 € and 62 € across the German, French, Italian and Spanish Amazon stores, in the single reading behind this page.

Priced in local currency, which the euro range above deliberately leaves out, it also appears on the British Amazon store.

Nothing whatever came back from the American Amazon store, so the buy button there opens a search instead of an empty page.

What Keepa returned in the single reading behind this page. Availability and prices move without notice.

Prices quoted in this text were read on 18 September 2026. The live price is at the top of the page.

More paddock stands

  • Rothewald rear paddock stand with rubberised supports

    Rothewald 30003544

    A rear paddock stand for parallel twin-sided swingarms with a 35 mm tube, weighing 5.7 kg, rated at 150 kg lifted for a vehicle of up to 300 kg total.

    Capacity
    Max 150 kg LIFTED; vehicle total weight max 300 kg (maker’s bullet). The title states "up to 300 kg", which is the vehicle figure.
    Tube diameter
    35 mm (maker’s bullet)
    Own weight
    About 5.7 kg (maker’s bullet)
    Adapters
    V-adapter for spool bushes AND angle adapter for parallel twin-sided swingarms, both included (maker’s bullet)
    Transport
    Dismantles into parts for travel and touring (maker’s bullet)
    Protection
    Non-slip rubberised angle supports, stated to prevent scratches on the swingarm (maker’s bullet)
    Amazon reference
    B0H3VYT4QJ (one reference across 5 Amazon marketplaces)
    EAN
    4099453121543
    • The maker separates the two figures explicitly — what the stand lifts, and what the whole machine may weigh
    • Dismantles, so it travels with the bike rather than staying in a garage
    • The title carries the larger of the two numbers

    Best for: Touring, where a stand that packs down means chain maintenance away from home.

    ≈ €56
    Check price on Amazon
  • SPECSTAR front and rear paddock stand set

    SPECSTAR VH569-BK

    A front and rear paddock stand set with adjustable forks, titled at 400 kg while its own bullet states 200 kg per stand — both figures are reported here.

    Capacity
    The title states 400 kg for the set; the third bullet states 200 kg PER STAND. Both are published by the seller.
    Front adjustment
    Front wheel holder adjustable from 22.9 to 31 cm (maker’s bullet)
    Rear adjustment
    U-shaped support forks 28.5 to 36.6 cm, plus L-shaped supports (maker’s bullet)
    Supplied as
    A set — front and rear, usable together or separately (maker’s bullet)
    Wheels
    4 rollers (maker’s bullet)
    Construction
    Steel frame with a triangular geometry (maker’s bullet)
    Amazon reference
    B07ZSWJ4N3 (one reference across 6 Amazon marketplaces)
    EAN
    0885469880888
    • Both U and L supports supplied, which covers spool-less and spooled swingarms
    • Adjustment ranges published in centimetres for front and rear separately
    • The title capacity and the bullet capacity are not the same number

    Best for: Getting both wheels off the ground with two stands rather than a jack.

    ≈ $60 / £56 / €73
    Check price on Amazon
  • VEVOR motorcycle scissor lift jack raised

    VEVOR Scissor lift jack 500 kg

    A motorcycle scissor lift jack rated at 500 kg, raising from 95 to 350 mm on a six-position safety pin, with a 365 × 222 mm non-slip platform that folds flat for storage.

    Capacity
    500 kg (from the title and bullet — the same figure in both)
    Height range
    95 to 350 mm (from the title)
    Safety pin
    Six positions, stated to hold the machine and reduce slipping (maker’s bullet)
    Platform
    365 × 222 mm, non-slip, extra wide (maker’s bullet)
    Folded height
    95 mm, for compact storage (maker’s bullet)
    Operation
    A removable metal handle turned to raise, no extra tools (maker’s bullet)
    Amazon reference
    B0C4KQGQ92 (one reference across 6 Amazon marketplaces)
    EAN
    0840349901596
    • The title figure and the bullet figure agree — which two stands in this family cannot say
    • A six-position mechanical safety pin, independent of the screw
    • A scissor jack lifts on the frame or engine — you must know where your machine takes a jack

    Best for: Lifting a machine clear of the floor for a chain, an oil change or winter storage.

    ≈ $54 / €45
    Check price on Amazon

The rest of this rider’s shelf

  • Everalo 5 mm visor pins, two pairs

    Everalo Pins 5 mm

    A set of two pairs of 5 mm visor pins for six helmet brands, compatible with standard 5 mm pin visors and explicitly not with oversized tear-off pins.

    Quantity
    2 pairs, so a spare set is on hand (maker’s bullet)
    Pin size
    5 mm (from the title)
    Stated brands
    AGV, HJC, Airoh, Nolan, LS2, Givi (from the title)
    Explicitly excluded
    Visors with oversized tear-off pins (maker’s bullet)
    Material
    The maker puts nothing in writing on this.
    Insert included
    No — these are the pins, not the anti-fog lens.
    Amazon reference
    B0DR37QT3Z (one reference across 6 Amazon marketplaces)
    EAN
    8050628472279
    • Two pairs, because the part that gets lost is the one you drop on a garage floor
    • Publishes what it does NOT fit, which is the useful half of a compatibility claim
    • Pins only — the anti-fog insert itself is a separate purchase

    Best for: Replacing pins lost or stripped when changing an anti-fog insert.

    ≈ €12
    Check price on Amazon
  • Namvo two-pack anti-fog film for helmet visors

    Namvo BZ02144

    A two-pack of micro-nano coated PET anti-fog film measuring 8.8 × 24.5 cm, with a stated service life of over three years and an explicit exclusion for bubble visors.

    Quantity
    2-pack (from the title)
    Dimensions
    8.8 × 24.5 cm (maker’s bullet)
    Material
    Micro-nano coated PET (maker’s bullet)
    Stated service life
    More than 3 years (maker’s bullet)
    Stated fitment
    Full-face, half, off-road helmets and goggles — NOT bubble visors (maker’s bullet)
    Fixing
    Strong adhesive on the back (maker’s bullet)
    Amazon reference
    B09Z2L7GNG (one reference across 5 Amazon marketplaces)
    EAN
    0610012469544
    • Publishes a service life in years, which nothing else in this family does
    • Dimensions published, and an exclusion published beside them
    • The service life figure carries no stated test condition

    Best for: A first attempt at an adhesive anti-fog film, where having a second one in the packet is the real feature.

    ≈ £5 / €6
    Check price on Amazon
  • Pinlock original replacement pins for helmet visors

    Pinlock 000388

    Original Pinlock replacement pins for visors with 5 mm holes, supplied as four sets of three parts — the spare part from the maker of the system itself.

    Fits
    Visors with 5 mm holes, for standard Pinlock inserts (from the title)
    Origin
    Original spare part from Pinlock (maker’s bullet)
    Quantity
    3 parts, 4 sets (from the title)
    Insert included
    No — these are the pins only.
    Material
    The maker puts nothing in writing on this.
    Listing bullets
    One, of fifteen words.
    Amazon reference
    B07NJ1F8QG (one reference across 6 Amazon marketplaces)
    EAN
    0731628294358
    • The original part from the company that invented the system, which removes the fit question entirely
    • Four sets, so a helmet and its spares are covered for years
    • A single bullet of fifteen words is the whole listing

    Best for: A rider who wants the original pins rather than a compatible copy.

    ≈ £8 / €15
    Check price on Amazon

All paddock stands